iecutool

Automotive ECU Tools

iecutool

Automotive ECU Tools

عناوین یادداشت‌ها

  • Flex Korhex Unlocks Bosch MD1CS003 in Bench Mode چهارشنبه 8 مهر 1405 09:42
    Finally! Flex Korhex released new Boot Glitch unlocking solution for Stellantis Bosch MD1CS003 ECUs. Version 8.23.0.0 of Flex Out Now New Flex update , new possibilities. Now you can perform Boot Glitch operations on Stellantis Group Bosch MD1CS003 with Korhex by leveraging the EMFI — Electromagnetic Fault Injection...
  • Autotuner New Update Add MD1CP002 MD1CS001 MG1CS003 ECU چهارشنبه 8 مهر 1405 09:39
    A major workflow upgrade for BMW Group platforms has landed on your Autotuner equipment! Bosch MD1CP002, MD1CS001, and MG1CS003 ECUs (powered by the SPC5777M microcontroller) are now supported directly in Bench mode on your AutoTuner Tool, completely replacing the need for Mail-in Unlock. Supported Lineup (Bosch...
  • ECUDesk Support Ticket: How to Create One چهارشنبه 8 مهر 1405 09:38
    ECUDesk ECU remap software has a built-in technical support system. You can submit questions directly from the software, create support tickets for ECU files, and receive responses from our specialists in the MY TICKETS panel. If ECUDesk does not recognize your file, does not support a required function, or you...
  • AutoTuner Adds EDC17CV54 Bench Mode Support دوشنبه 6 مهر 1405 12:01
    An essential software release targeting the Agricultural, Construction, and Forestry sectors has landed on your equipment! We are thrilled to announce official support for the Bosch EDC17CV54 ECU via 100% Bench Normal Read (NR) on your AutoTuner Tool . Supported Fleet Highlights (Bosch EDC17CV54): AGCO Group (Massey...
  • Foxflash Ford SID209 ECU Clone Using GODIAG GT100+ دوشنبه 6 مهر 1405 11:59
    Foxflash programmer new user report today: Read password: Read password from OBD. Use the godiag gt100+ to read the password via OBD on bench mode without the car. Read/write: Full read and write was done via BDM. Cloned it successfully. Checksum by foxflash.
  • Foxflash Offline Version: How to Get It دوشنبه 6 مهر 1405 11:58
    The offline version of the Foxflash programmer is available now. Here, iecutool.eu collects some frequently asked questions about the Foxflash offline version. MAJOR UPDATE: FOXFLASH GOES FULLY OFFLINE NO INTERNET. NO PC LIMIT. NO 15-DAY AUTHORIZATION. How does the offline mode work? The new Foxflash Offline Dongle...
  • OBDSTAR ECU Master: Renault ME17.9.23 Clone Guide دوشنبه 30 شهریور 1405 10:33
    The Renault Kwid ECU ME17.9.23 TC1724 was brought in for cloning. The part number on the ECU is 0 261 S17 723. The goal was to read the ECU data using the OBDSTAR ECU Maste r, back it up, and then write the data back to verify the process works. Bench Mode Connections All necessary connections were made for bench mode...
  • FormulaFlash VAG Simos PCR2.1 Bench Read/Write Guide دوشنبه 30 شهریور 1405 10:31
    Can Formulaflash perform VAG Simos PCR2.1 unlock? It cannot unlock OTP. But it can do pcr2.1 on bench without unlocking. Read on bench ok. Write on bench ok. Write EEPROM back to be unlocked. Checksum correction with formulaflash. Works like a charm. What’s the procedure: Read eeprom, write eeprom for unlock and read...
  • How to Check a PSA MD1CS003 ECU is Locked or Not? دوشنبه 30 شهریور 1405 10:29
    Question: It’s a Peugeot Partner 1.5 132hp with Bosch MD1CS003 ECU. Car build date is 2020/06. Try to read this ECU with Flex programmer. How do i know if ecu needs to be boot glitched or not? Is there any danger of trying to connect and reading on non locked protocol if ecu requires boot glitch? Here is the clue. How...
  • AutoTuner Adds 100% OBD Support for Ford EMS210x ECUs پنج‌شنبه 26 شهریور 1405 10:08
    FORD DURATEC RELEASE: Continental EMS210x ECUs go live via 100% OBD! A practical software update targeting Ford’s naturally aspirated petrol engines is now live on your equipment! Continental EMS2101, EMS2102, EMS2103, and EMS2106 ECUs are now officially supported via 100% OBD on your AutoTuner Tool . Take full engine...
  • Foxflash BMW MD1CP002 ECU Bench Read/Write Guide پنج‌شنبه 26 شهریور 1405 10:04
    Read and write BMW G30 530xd 2018 Bosch MD1CP002 ECU with Foxflash programmer successfully. ECU: MD1CP002 Stage1 Read-bench Write-bench Checksum manually. Foxflash works with md1/mg1 till 06/2020. Till 2021 may after this date all are locked by BOSCH. You need Flex/KESS3/OBDSTAR etc.
  • Dimsport The Genius Unlocks BMW MD1/MG1 ECUs on Bench پنج‌شنبه 26 شهریور 1405 10:02
    Dimsport The Genius universal ECU programmer released new Bosch MDG1 Bench solution for BMW and MINI! Dimsport expands Bosch MDG1 coverage with a new Bench solution for several ECUs on BMW and MINI vehicles. With The Genius, you can access the ECU content and perform programming directly in Bench mode, without opening...
  • How to Read and Write Audi EDC16U31 with Multi Prog جمعه 20 شهریور 1405 06:39
    Read and write Audi A6 diesel 2.0 TDI Bosch EDC16U31 ECU successfully with Xhorse Multi Prog . Read ext eeprom, ext flash & int flash ok, write ok. Bench mode. EGR DPF off. Checksum correction with multiprog. Did the same ECU with KT200 II latest month. KT200 does bad checksum on this ECU. Write unsuccessfully !!...
  • How to Read and Write Renault Captur DC4 TCU جمعه 20 شهریور 1405 06:37
    FormulaFlash read and write DC4 (Getrag) gearbox on bench successfully. Renault Captur 1.2 — DC4 (Getrag) TCU read before attempt to repair — OK. Read eeprom & flash ok. Write eeprom & flash ok. Bench mode.
  • Autotuner Adds Heavy Duty MD1CS069 / MD1CE101 – OBD NR BETA جمعه 20 شهریور 1405 06:36
    Agricultural, Construction, and Heavy Duty coverage takes a massive leap forward on your AutoTuner Tool with the release of Bosch MD1CS069 and MD1CE101 ECUs. via 100% OBD Normal Read (NR) — now live in BETA phase! This update unlocks a massive lineup of tractors, combine harvesters, telehandlers, and construction...
  • Flex 8.18.0.0 Supports Mercedes CPC5 Boot Unlocking چهارشنبه 18 شهریور 1405 10:38
    Magic Motorsport Flex adds new boot glitch unlocking protocols on September 8th, 2026. Version 8.18.0.0 of Flex Out Now Mercedes Truck CPC5 control units installed on vehicles produced after 2020 are now among the new units supported by Flex + Korhex. The dedicated procedure allows you to work in Boot Glitch mode...
  • Flex Software Freezes? Try These Solutions چهارشنبه 18 شهریور 1405 10:31
    Problem: The screen suddenly goes a bit darker and the Flex programmer software app freezes. At the same time, the USB and update icons start flashing red. It only started doing this in the last couple of days. Any ideas what could be causing it? Solution: 1). The laptop is on standby. Quick reboot and its fine. 2)....
  • FormulaFlash Read and Write Hyundai MED17.9.8 ECU چهارشنبه 18 شهریور 1405 10:29
    FormulaFlash read and write Hyundai/Kia KEFICO ECU successfully. Full Flash + EEPROM read on Bosch MED17.9.8 (TC1767) via Formula Flash. Supports Bench / Boot mode with automatic checksum. Here read and write on bench mode ok. IMMO OFF ok Stage1.
  • Flex V8.16.0.0 Add MG1CA920 SPC58N Boot Unlock Using Korhex سه‌شنبه 17 شهریور 1405 09:56
    With Magic Motorsport Flex version 8.16.0.0, Korhex extends support to new-generation SPC58N microprocessors. New support for Bosch MG1CA920 on Rotax engines. Flex version 8.16.0.0 is now available With the latest Flex update, Korhex extends support to new-generation SPC58N microprocessors. The Bosch MG1CA920 control...
  • KESS3 Update OBD Protocol for BMW Mini MD1CS001 "Locked" ECUs سه‌شنبه 17 شهریور 1405 09:50
    Alientech KESS3 released a new OBD protocol for Bosch MD1CS001 locked ECUs with KESS3 and Powergate. The Bosch MD1CS001 ECUs fitted to recent BMW and Mini diesel applications with 1.5L and 2.0L B37 and B47 engines can now be read and written directly via OBD after the initial BENCH unlock with the dedicated KESS3...
  • Autotuner Add Bench Mode Read for ECM4 Heavy Duty ECU سه‌شنبه 17 شهریور 1405 09:49
    We are thrilled to announce official support for Bosch ECM4 ECUs powering Renault , Volvo and Mack Trucks platforms via 100% Bench Normal Read (NR) on your AutoTuner Tool . Take control over long-haul commercial platforms on your AutoTuner Tool! Bosch ECM4 ECUs powering 13L Euro 6 engines across Renault Trucks, Volvo...
  • Flex New Updates Support DAF Delphi ETC3 UDS Unlock چهارشنبه 11 شهریور 1405 10:19
    With the new Magic Motorsport Flex update , Korhex enables unlocking of DAF Delphi ETC3 UDS control units in Boot Glitch mode, directly inside your workshop and in complete autonomy. Flex Version 8.15.0.0 Out Now Korhex leverages EMFI — Electromagnetic Fault Injection technology to act on the processor and allow the...
  • Magic Motorsport Flex Unlocks Silverado E90 ECM on Bench چهارشنبه 11 شهریور 1405 10:18
    Magic Motorsport Flex unlocked 2021 Chevrolet Silverado Global-A E90 truck ECM successfully. E90 ECM is found in 2019–2022 Chevrolet Silverado 1500 & GMC Sierra 1500 (5.3L & 6.2L V8 — L84/L87) Pre-facelift models (non-Global B) models. Unlocked on bench mode. Read and write on bench. No need to wait 2+ weeks...
  • PSA MD1CS003 Read with Autotuner After Flex Unlock چهارشنبه 11 شهریور 1405 10:16
    Here is a user’s experience with Autotuner reading after a boot glitch unlocked by Flex . "I tried to test an Autotuner reading after a boot glitch with Flex MD1CS003 +2021 0281 037 200 It works perfectly. I had already tried before, it didn’t work but I understood why. If you unlock with Flex + a file mod, AT no...
  • Flex Adds Marelli MBC1/MBC2 Support for BMW Motorcycles پنج‌شنبه 5 شهریور 1405 10:40
    Magic Motorsport Flex programmer released new Motorcycle bench protocols on August 26th, 2026. V8.14.0.0 Software New programming opportunities for the motorcycle world: version 8.14.0.0 of Flex introduces support in Bench for Marelli MBC1 and MBC2 control units installed on BMW Motorrad and Husqvarna vehicles. This...
  • FormulaFlash V1.2.1.0 Adds EMS2212, EMS2215 & EMS2219 ECUs پنج‌شنبه 5 شهریور 1405 10:39
    FormulaFlash ECU programmer will release new software version 1.2.1.0 on August 27th, 2026. UPDATE DATE: 2026.8.27 VERSION: 1.2.0.0 → 1.2.1.0 Update Feature: New DTC OFF ECUs Toyota Denso Gen1 OBD / BENCH support Expanded ECU protocol coverage 1. USER CENTER NEW DTC OFF SUPPORT 17 NEW ENTRIES EDC15C11 EDC15GP EDC15V...
  • FormulaFlash Supports BMW MD1CP032 Unlocking by Bench mode پنج‌شنبه 5 شهریور 1405 10:37
    Formulaflash programmer software 1.2.0.0 released BMW 2021+ MDG1 ECU bench unlocking feature. Here is an example of a locked MD1CP032 ECU. Formuflash unlocks this ECU in bench mode; no opening ECU required. Quick search "Unlock" and select BMW bosch MD1CP032 ECU. Choose bench mode and check wiring diagram....
  • Flex v8.13.0.0 Update VAG MG1CS111 ECU Bench Unlocking دوشنبه 2 شهریور 1405 10:05
    Magic Motorsport Flex support for the VAG Group expands even further. With version 8.13.0.0, it is now possible to program the Bosch MG1CS111 ECU, equipped with a TriCore TC298 processor. Thanks to Boot Glitch unlocking, it is possible to work on the ECU completely independently, including in Bench mode, without the...
  • FormulaFlash Supports BMW B48 B58 ECU Bench Unlocking دوشنبه 2 شهریور 1405 10:03
    Formulaflash ecu programmer released a major software update V1.2.0.0 on August 19th, 2026. Updated BMW MD1/MG1 ECU bench unlocking without opening ECU. Bosch DDE8/DME8 B48 B58 ECUs now supported on bench mode. Supported ECU models: Bosch MD1CP032-TC299 Bosch MD1CS001-TC298 Bosch MG1CS024-TC298 Bosch MG1CS049-TC298...
  • Flex Programs PSA EDC17C60 ECU in Bench Mode دوشنبه 2 شهریور 1405 10:01
    Magic Motorsport Flex PSA EDC17C60 project completed: 1) EEPROM virginized 2) Full software update in bench mode 3) Immo-off in EEPROM to avoid issues with future dealer updates 4) Configuration change (automatic/manual transmission, standard key/keyless, etc.) 5) Programming the desired PIN into the ECU in bench mode