FormulaFlash 1.0.0.7: ME788 BSL Mode and IMMO Off Features
FormulaFlash released new software 1.0.0.7 on October 21st, 2024.
1. Adds ME788 BSL mode, read, write, clone, checksum and IMMO Off, idle speed adjustment, power upgrade (World’s first)
2. New checksum: Simos 8.x, MSD80, MSD81, MSD85, MSD87
Upcoming updates:
1. ME7.8, ME797, ME7971 virtual reading and writing,
checksum, one-click operation mode for immo off, idle speed adjustment, power
upgrade
(World’s first)
2. ME797, ME7971 BSL read, write, clone and checksum
3. EDC16, EDC17, MED9 DTC clean and idle speed adjustment solution
Fixing U2A200 Fault Code After Audi SCR Off with Foxflash
Problem:
Successfully read and write Audi Bosch Md1cs004 ECU with Foxflash. SCR off. But scanner shows fault code U2A200 after scr off. Reductant quality sensor no communication.
How to fix it?
Solution:
Just disconnect adblue pump.
Disconnect adblue if the fault doesn’t
disappear do dtc off solution as well.
User feedback:
Unplugged Scr unit. Dtc gone. But new in gateway instead for scr.. coded scr out with autel in gateway. Now no issue.
How to Read and Write Yamaha MT 07 2021 R5F10DMFJ Chip
It is a Yamaha MT 07 2021 with R5F10DMFJ chip. How to read/write this massive chip? What tool can be used?
Here is the clue.
UPA 1.3 cannot read, you need pogrammer for this mcu smok, xtool, carprotool, CG100/CG100X,vvdi prog ect
Here is the pinout wiring connection.
Feedback:
I finally bought a CG100x from iecutool.ru. I’ve just made on the soldering points. successfully calculate km to 5000. Thanks so much for your help.