FormulaFlash Update Adds Hyundai MED17 CS/PIN and GM Stage1

FormulaFlash ECU and TCU programmer released a new software update on April 28th, 2025.

No.1

IMPORTANT UPDATE

Added Hyundai Kia ME17 series, MED17 series, MEG17 series EPROM read /write/CS &VIN modification.

No.2

IMPORTANT UPDATE

Added Delco’s E37/ E39/ E39A/ E67/ E78/ E87/ E98/ E92/ E80 /E83 power upgrade (stage 1) + idle speed adjustment + water temperature calibration.

OTHER UPDATES

• Added Delphi MT22, MT20 EEPROM verification + VIN correction
• Added SIMOS8.1/8.2 BOOT FLASH+EEPROM Read&Write
• Added SIMOS8.3/8.4 BENCH FLASH+EEPROM Read&Write
• Added SIMOS 18 MAPS read /write/CS
• Added Hyundai series ECU ME17.9.11, ME17.9.12, ME17.9.2X, ME17.9.8, MEG17.9.2, MED17.9.8MEG17.9.8, MEDG17.9.8, MEG17.9.21 power upgrade + idle speed adjustment
• Added ME7.5, ME7.5.10, ME7.5.20, ME7.5.30 flash FLASH + EEPROM read and write + VIN correction + power upgrade + total speed adjustment +Immo off + fuel quality defect repair
• Added Chinese Bosch system ME17.8.8, MED17.8.10, MED17.8.2 power upgrade + idle speed adjustment
• Added SIMOS8.1, SIMOS8.2, SIMOS8.3, SIMOS8.5, SIMOS8.4, SIMOS8.6 idle speed adjustment + power upgrade (stage1)
• Added MT20, MT22 series 256KB/512KB/768KB checksum

OPTIMIZATION

ME17.5.20, ME17.5.22, MED17.5.25, ME17.5.26 REPAIR SOME FUNCTIONS AND ADD FIRMWARE.

  

Easy VAG DQ381 Gearbox TCU Clone Using FormulaFlash

FormulaFlash new user review:

VAG DQ381 geabrox tcu cloning is done with FormulaFlash programmer.
Either do it on car or bench.

1).
Do it on car.
No need to remove the mecatronic.
Cloning all ok.

2). on bench.
Cloning VW 2018- DQ381
All good on bench.

New FormulaFlash V1.0.2.0 Update: GM Delco ECM IMMO Off Feature

FormulaFlash ECU and TCU programmer released new software version 1.0.2.0 on March 19th, 2025.

• Added Delco Exx series E37/ E39/ E39A/ E67/ E78/ E87/ E98/ E92/ E80/ E83 One-click Immo off + VIN modification
• Added MG1UA008/MG1US008/ MG1UAUP8/ MG1US708 series FLASH read, write and Checksum, as well as One-click power upgrade (stage1)
• Added SIM2K-51.X/SIM2K-D51/ SIM2K-34/ SIM2K-33/SEC60 Wuling Bench mode read and write + VIN correction
• Add SIMOS8.5/SIMOS8.6 MAPS read and write + Checksum
• Added Bosch ME7.4.4/ME7.4.5 (TYPE96) one-click Immo off
• Added Kefico MEG17.9.8 + one-click Immo off
• Added BMW MSV90 one-click power upgrade (stage1)
• Added BMW MSD81/ MSD85/ MSD87/ MSV80/ MSV90 One-click water temperature modification
• Added ME17.8.8/ ME17U6/ ECU6.1/ MED17.8.10/ MED17.8.2/ MEV17.2.1/ MEV17.4.6/ MEVD17.2/ MEVD17.2.3/ MEVD17.2.5/MEVD17.2.6/MEVD17.2.9/MEVD17.2.G/ MEVD17.2.P/ MEVD17.2.4/ MG1CS003/ MG1CS201/ MG1CS024/ MG1CS049/ MEV17.2/ MED17.2/ MEV17.2.2/ MG1UA008/ MG1US008/ MG1US708 One-click water temperature modification
• Added Bosch system ME788 and M7 series VIN correction + EEPROM
  Read, write and Checksum
• Added Delphi DCM3.7AP, MT34 eeprom&flash read and write
• Added Continental GPEC2, GPEC2A, GPEC3, GPEC4, SIM271KE ExtEE-PROM&Flash read and write by boot mode
• Added Marelli 8GMW, 8GSF, 8GSW, IAW 4AF HW204, IAW 4AF HW407, IAW 59F HW<100, IAW59FHW603/HW606, IAW 5AFHW303/HW306, IAW 5AF HW603/HW607, MJD 8F2, MJD8F3, MULTIET MJD 6F3, 8GMF HW02, IAW 5SF8, IAW 5SF9 eeprom&flash read and write and Checksum by both OBD & Bench mode
• Added Bosch system ME7.9.3, ME7.5–1M eeprom&flash read and write
• Added French language support

How to Solve FormulaFlash Driver Problem on Windows 7

Problem:

I’m using windows 7 pro 32 and the FormulaFlash programmer driver is not found. Any solution?

Solution:

Use Windows 10 64bit operating system.

Make sure your computer is connected to the internet with a good signal.

Disable firewall and anti-virus before unzipping FormulaFLASH.exe, otherwise, the software cannot be opened normally.

Read also:

http://www.pcmtuner.org/how-to-install-and-activate-formulaflash-software/

New FormulaFlash V1.0.1.2 supports Mareli 4HV 7GV and SIMK41 ECUs

FormulaFlash ECU and TCU programmer released new software Version 1.0.1.2 on Jan. 16th, 2025.

Update Date: January 16, 2025

Features:
BMW Leading Functions
• Models supported:
MD1CP002 (SPC5777), MD1CP032 (TC298TP), MD1CS001 (TC298TP), MG1CS003 (SPC5777), MG1CS024 (TC298TP), MG1CS201 (TC298TP)
• Key Features:
• EPROM checksum

• One-click modification of VIN/ISN
Activation: FREE

VW Leading Functions
• Supported Modules: VW & Audi MED17/EDC17
• Key Features:
• EPROM checksum
• IMMO off/IMMO cloning/new status mode
• One-click modification of VIN
• One-click operation for power level/IMMO ID data synchronization
Activation: FREE

Additional Enhancements
• Supported GM Models:
E37/E39/E39A/E67/E78/E87/E98/E92/E80/E83
Improvements:
• Checksum algorithm upgrade for increased stability and reliability

Added Features:
• Magneti Marelli IAW 4HV 95320 EPROM read/write
• Magneti Marelli IAW 7GV 95320 EPROM read/write
• Bosch MEG17.9.21 TC1724N EPROM/Flash read/write & checksum
• Mainland/Siemens SIMK41 29F200BT, SIMK41 29F200B EPROM and flash read/write & checksum
• Added ME 7.5.10 EPROM/Flash read/write