OBDSTAR G3 Bench Read/ Write VAG EDC15VM+ ECU Pin Code
EDC15VM+ group vag read and write and pin extraction all ok using OBDSTAR X300 Classic G3 or DC706.
Search "EDC15VM" and select protocol: VW Bosch EDC15VM+ Kline 29F400BT+
24C04
Read EXT eeprom 24C04
Read EXT flash 29F400BT
Write EXT eeprom 24C04
Write EXT flash 29F400BT
Read pin code ok.
Bench mode using P004 adapter.
Photo attached:
Foxflash Update BMW MEVD17.2.G OBD VR Files
Foxflash ECU and TCU programmer adds new VR files and fixed checksum bugs for BMW MG1 MD1 ECUs in Feb. 2025.
Online checksum, VR files update
Software version 1.4.3
firmware version FW:D087
Update content:
VR database update
BMW M2 (F87)
Bosch MEVD17.2.G OBD
BMW M1 (F21)
Bosch MEVD17.2.G OBD
BMW M1 (F20)
Bosch MEVD17.2.G OBD
BMW 2 Series (F45)
Bosch MEVD17.2.3 OBD
BMW 2 Series (F45)
Bosch MEVD17.2.3 OBD
BMW 2 Series (F46)
Bosch MEVD17.2.3 OBD
Checksum bugs fix
BMW 3 Series (F30)
Bosch MG1CS201
BENCH
BMW 3 Series (G21)
Bosch MG1CS201
BENCH
BMW 3 Series (G20) Bosch MG1CS003
BENCH
BMW 3 Series (G20) Bosch MD1CP002
BENCH
BMW 3 Series (G20) Bosch MG1CS024
BENCH
BMW 3 Series (G20) Bosch MD1CS001
BENCH
BMW 3 Series (G21) Bosch MG1CS003
Alfa Romeo Marelli 8GMF OBD Bench Jtag OTB
Alfa Romeo Marelli 8GMW OBD
Bench Jtag OTB
Alfa Romeo Marelli 8GSW OBD Bench Jtag OTB
Alfa Romeo
Marelli 8GMK OBD Bench Jtag OTB
Update method:
Install the latest verson 1.4.2 and keep
your computer connected to the internet.
Version 1.4.3 will be automatically
pushed and installed between Feb. 15th to 18th.
How to Clone ACDelco E83 ECM Using CG FC200 on Bench
Successfully cloned Chevrolet Sonic ACDelco E83 ECM using CG FC200 programmer on bench.
Procedure:
Select Acdelco E83 MPC5565 ECU.
Check wiring diagram.
Connect FC200 with original ECM.
Connect and read VIN.
Read and save EXT Flash data.
Disconnect original ECM.
Connect FC200 with donor ECM following the same wiring.
Write flash to the donor ECM.
Write flash successfully.
Clone E83 ECM successfully.
Install the donor ECM to vehicle.
OBDSTAR DC706 Idle Speed Repair for 2016 Honda Civic 1.5T
A 2016 Honda Civic with a 1.5T engine exhibits idle shaking when in D gear. The dashboard shows that the engine speed is about 600–650 rpm. Using a diagnostic tool shows no fault codes for the vehicle, and hardware inspection also reveals no abnormalities. Cleaning the throttle still doesn’t solve the problem.
10th generation Civic low idle problem can be perfectly solved by OBDSTAR DC706 using its one-click idle speed repair function.
Tools required:
OBDSTAR MP001 programmer or P003+
Power supply
ECU
Procedure:
Quick search Honda KEIHIN PGM-FI TC1782 ECU. Here choose MP001 bench mode.
Check instructions and wiring diagram.
Connect ECU with MP001 follow the wiring diagram. Don’t forget to connect with an extra power supply.
Connect ECU.
Read and save INT flash.
Write INT flash. Select flash data just read.
Press Yes to verify data (correct checksum).
OBDSTAR DC706 detects the engine idle speed 620, adjust the idle speed to around 800 RPM will solve this issue.
Confirm and write int flash.
Write flash successfully. Honda’s low idle problem was solved.
Audi Q7 MED9.1.1 ECU Read and Write with Foxflash on Bench
Foxflash user new feedback:
Audi Q7 4.2 FSI — ECU MED9.1.1
Successfully pinout connection for
MED9.1 not for MED9.1.1!!!
Read on bench.
Write on bench.
Checksum with foxflash.
Stage 1 all ok.
Foxflash Audi MED9.1 MPC563/4 ECU bench pinout
FYI:
Here is the bench pinout for Audi MED9.1.1 MPC563/4 ECU.
