FormulaFlash 1.0.0.9 Adds BMW MSV80-MS85, MG1 One-Click Solution
FormulaFlash ECU TCU programmer released new software version 1.0.0.9 in Nov. 2024.
FormulaFlash software 1.0.0.9
Adds BMW ISN VIN Modification one-click solution
Update models:
MED17.2 TC1766
MED17.2, MED17.4.6 TC1796
MED17.2.2
TC1767
MED17.2.2 TC1797, R56, N55
MEVD 17.2.3 TC1793 B38,
B48
MEVD17.X.X TC1797 N12, B20, N55, S63
MSV80, MSV90, MSD80, MSD85,
MG1CS003, MG1CS021 read, write, modify by one click
FormulaFlash promotion:
Nov. 4th, 2024, Nov. 15th, 2024
Bonus 1: save $125
All existing user and new buyer will
get 6 month license free for the BMW VIN/ISN modification
package
Bonus 2: save $175
New buyer will get an
additional 6-month subscription for free.
The price for BMW VIN/ISN modification package is $250. After this promotion, it will be needed to pay extra to activate it.
Fiat ME17.3.0 ECU Read and Flash Using Godiag GPT and GT100
We are reading the Fiat Bosch ME17.3.0 irom TC1724 ECU. We are flashing
directly with GPT.
But it does not work with pcmtuner directly.
Without the CNFs or the boots we are doing directly GPT1 from here. We need godiag gt100 breakout box and GPT adapter.
The GPT adapter has built-in resistors.
Set up GPT connection. Then we can read ECU with pcmtuner bench module 71.
OBDSTAR DC706: Read CS and PIN from VW Jetta ME17.5.6 ECU
With OBDSTAR DC706, users can read eeprom and flash on a 2011 VW jetta ME17.5.6 ECU, then use the immo decoder function to get the CS and PIN code from the ECU.
Immo data decryption give you the pin and CS. Read eeprom and flash, then hit immo data calculation. then it gives you CS, pin and MAC.
It also reads immo data, so you can load that in your key programmer and make a dealer key with the CS and PIN. Much easier to do AKL this way than pulling the cluster.
It is a hell of a lot easier than pulling the cluster. key work with 00 7th byte CS. then manually programmed remote.
Foxflash Win7 Error Solution: "Unable to Check Server"
Problem:
How to solve this problem. after installing new Foxflash version 1.4.2 on windows 7?
Error
"Unable to Check Server". I always use Windows 7, this happened after the
update.
Solution:
This message will appear on Win7 system. On Win10 it does not appear.
Some use it on Windows 7, getting this message for a few days, but FoxFlash
will load without a problem. Try running it without pressing OK. If it
doesn’t work, restart the computer and try again despite this
message.
After a few days this message didn’t come out again and it
still works well with the latest version 1.4.2 of FoxFlash.
We strongly recommend installing foxflash software on Win10 or Win11 systems.
How to Bench Read/ Write Iveco EDC17CV41 with Foxflash
Foxflash read and write Iveco STRALIS EDC17CV41 ECU on bench successfully.
To read and write use the following driver:
→ BENCH MODE
→ Iveco
→
TC1797 — Iveco
→ EDC17 CV41
Read ok,
write ok
Checksum by foxflash.
EGR + DPF off.
Check pinout here
http://www.pcmtuner.org/edc17cv41-pinouts-to-pcmtuner-and-foxflash/