OBDSTAR G3 Read BMW MG1CS003 ISN Code Successfully

The OBDSTAR X300 Classic G3 was able to take the ISN out of a BMW 320 year 2016 with MG1CS003 engine ECU.

ECU: Bosch MG1CS003 SPC5777

Using G3 (with ECU license activation) and MP001 programmer on bench.

Even without a valid subscription.

I couldn’t read ISN code for these ECUs with CG FC200 or multi prog.

But the G3 for those who have it can already take it out.
After reading the pin code, you can program the key with the Autel IM508 or other programmers using the released ISN code.

FormulaFlash 1.1.0.0 Supports Toyota Gen3 Denso ECUs

FormulaFlash ECU programmer released new software version 1.1.0.0 in January 2026.

FormulaFlash V1.1.0.0:

UPGRADE DETAILS

NEW PROTOCOLS ADDED

Denso 3rd generation

Toyota Auris 2019–2021 DENSO GEN3
Toyota Avalon 2018–2021 DENSO GEN3
Toyota CH-R 2019–2022 DENSO GEN3
Toyota Camry 2018–2021 DENSO GEN3
Toyota Corolla 2019–2022 DENSO GEN3
Toyota Crown 2019–2022 DENSO GEN3
Toyota Harrier 2018–2022 DENSO GEN3
Toyota Highlander 2019–2022 DENSO GEN3

Toyota Hilux/Vigo (8th) 2020–2022 DENSO GEN3
Toyota Innova 2016–2020 DENSO GEN3
Toyota Kluger 2019–2022 DENSO GEN3
Toyota Land Cruiser 2020–2022 DENSO GEN3
Toyota Levin 2019–2021 DENSO GEN3
Toyota RAV4 2019–2021 DENSO GEN3
Toyota Venza 2020–2022 DENSO GEN3
Toyota Yaris 2018–2022 DENSO GEN3

Read, write and checksum correction without disassembly or external adapters.

Toyota Gen II and Gen I ECUs coming soon.

AC Delco

ACDELCO T87A (TCM), SPC564A BENCH read/write,
ACDELCO T87 (TCM), SPC564A BENCH read/write,
ACDELCO E82 BOOT mode read/write + checksum MPC5676,
ACDELCO e730/35/40/45/50 (TCM), MPC555 BENCH read/write,
ACDELCO E87 BOOT mode read/write + checksum MPC5565,
ACDELCO E92 BOOT mode read/write + checksum MPC5674,
ACDELCO E98 BOOT mode read/write + checksum MPC5674,

ECU DATA CENTER IMMO OFF MODULE

BMW Mini MSV70,
GM series, Cadillac, Buick, Chevrolet, Opel E37, E38, E67, E78,
Citroen, Peugeot ME7.4.4, ME7.4.5,
Toyota Denso 3rd generation.

Launch X431 ECU Programmer for Replacing Mercedes DSM FBS4

How to replace Mercedes-Benz W212 DSM A0002703452 (FBS4) with Launch X431 ECU & TCU programmer on bench?

Quick search DSM, choose DSM and Bench mode.

Check wiring diagram.

Connect DSM FBS4 with Launch X431 ECU programmer according to the diagram.

Read module information

Read EEPROM data
Read and save original data.

After reading data, exit directly and replace the donor Gearbox that needs to be replaced.
Connect the donor Gearbox with Launch X431 ECU programmer.
Read module information and read eeprom for the donor gearbox to back up data.

Select Personalization.

Upload the original gearbox eeprom data and personalize data.

Persianization successful.

New gearbox needs to be programmed to start. Use MB star device for programming and coding.

www.iecutool.eu

Fix AutoTuner Software Crashed When Reading ECU

Problem: Still having issues with autotuner, it stuck on reading ECU page and crashed. maybe someone been through this?

Solution:

Delete Autotuner, re-install software and try new USB cable.

Solving MMS Flex EDC17 ECU Bench Reading Issue

Problem: I couldn’t read EDC17c74 with Flex programmer on bench i had read that ecu one year ago no problem. or maybe my flex box is the problem?

Solution:

Check if wires are not broken. It may stop working when wires were broken.

EDC17 requires pin 4 in slot A as we can see in photo he have it on 2.

It’s user error, in pinout you can see it will tell you A-4 because A-4 is terminal 15 not like A123 that are terminal 30.

Move ignition pin 2 to pin 4.