Free DPF GPF EGR Adblue by FormulaFlash Platform
Good news! FormulaFlash programmer free ECU Functions — now available!
We are excited to offer FREE processing for essential ECU functions directly through our platform. Take full advantage of this powerful tool to optimize your vehicle’s performance and reliability without any cost!
Available Free Functions:
• DPF (Diesel Particulate
Filter)
• GPF (Gasoline Particulate Filter)
•
OPF (Otto Particulate Filter)
• EGR
(Exhaust Gas Recirculation)
• EVAP (Evaporative Emission
Control)
• AdBlue (SCR/UREA system)
Upload your file, run the analysis, and let the system automatically return
the items that can be disabled — fast, easy, and free!
Start improving your
ECU files today — no license fee, no hidden costs.
Test it now while it’s in
Beta!
If your tool is still only shows just DTC beta, don’t worry. Keep an eye on our update.
BMW EDC16C35 Stage 1 Remap with PADFlash and XIRdecoder
Here iecutool.eu demonstrates a Stage 1 remap on BMW using Padflash tool and XIRdecoder software.
With the right software
and tools, remapping has never been so easy.
EDC16C35 BMW ECU read and write
with Padflash tool.
Automatic file tuning with XIRdecoder software.
Step 1: Read the ECU with PADFlash
Select Bench Mode- EDC16/ME9 Protocol.
Connect ECU with PADFlash via bench box on bench mode.
Read and save full
Backup data (eeprom and flash).
Step 2: Modify File with XirDecoder
Select EDC16C35
protocol in XirDecoder.
Hit OK and upload original backup data read by PADFlash.
System says STAGE 1 and DPF OFF are possible to change.
We need to perform Stage 1 and Vmax Off (remove speed limit). Select STAGE 1 and VMAX OFF then hit Download to modify data.
Save the modified file.
NOTE: XirDecoder does not make checksum correction. It’s the tool’s job.
Step 3: Write the Modified file with PADFlash
Write the modified data with PADFlash. It will do checksum correction online.
Then install ECU back to vehicle and test.
Solution for Foxflash Login But No Program Launch
Problem: Failed to run Foxflash software after login?
How to fix
program not starting after this screen?
It’s Windows 10 system.
Solution:
Make sure foxflash is plugged in and showing as dfb in Device Manager.
Kill the app through task manager.
Unplug FoxFlash USB.
Open FoxFlash
manager.
Click Activate.
After the screen process started plug-in the USB
cable and press OK.
After that open FoxFlash.
If the problem exists, contact your customer service.
FormulaFlash July Update Adds Simos IMMO Functions
FormulaFlash programmer released new software upgrade on July 16th, 2025. This update significantly expands compatibility with immobilizer (immo) data cloning, FLASH/EEPROM read/write, and checksum correction across multiple brands and ECU types.
Update Content
Volkswagen Audi Porsche
- Added SIMOS12.X / SIMOS8.3X / SIMOS8.4X / SIMOS8.5X / SIMOS8.6X BENCH mode immo data cloning and modification
- Added SIMOS18.X / SIMOS8.1X / SIMOS8.2X BOOT mode immo data cloning and modification
- Added SIMOS 12.X Bench mode FLASH+EEPROM read/write and Checksum
Bosch
- Added ME7.5 BOOT mode FLASH+EEPROM read
- Added ME7.5.10 BOOT mode FLASH+EEPROM read
- Added EDC17C81 OBD mode FLASH read/write
- Added Diesel EDC17C63 OBD mode FLASH read
- Added Diesel EDC17C55 OBD mode FLASH read
Continental
- Added SIM2K–341 (TCM) TC1766 BOOT mode FLASH+EEPROM read/write
Delphi China
- Added DCM6.2AP Flash read/write
- Added MT60.1 MC9S12XEP768 protocol
- Added MT60 MC9S12XEP768 protocol
- Added MT62.3 SPC5634 protocol
- Added MT22.5 BENCH/OBD mode FLASH+EEPROM read
- Added MT22.3 SPC5643 BENCH/OBD mode FLASH read
- Added MT22.3 SPC5634 BENCH/OBD mode FLASH read
- Added MT22.3 RA BENCH/OBD mode FLASH read
- Added MT62.1 SPC5634 BENCH/OBD mode FLASH read
- Added MT92.1 TC265 BENCH/OBD mode FLASH read
- Added MT92 TC265 BENCH/OBD mode FLASH read
- Added MT92 TC1767 BENCH/OBD mode FLASH read
- Added MT92 BENCH/OBD mode FLASH read
- Added MT95.1 TC367 BENCH/OBD mode FLASH read
- Added MT60 XEP768 BENCH/OBD mode FLASH read
Wuling
- Added SIM2K–D51, SIM2K–51.X, SCE60 read/write
- Added OBD+BENCH mode EXTFLASH data read
Foxflash V1.4.3.1 Asks for Activation After Update
Problem: I have foxflash manager version 1.4.1 when instart it it says newer update is available 1.4.3.1. After update, it asks to contact the vendor to activate. Do I need to activate it again?
Solution:
Yes, in this case, you need to contact us to activate Foxflash.
Send the device serial number and register email to us to activate software via Teamviewer.
Contact
Whatsapp:+8618046220975
Email:Sales@iECUtool.eu