Foxflash ECU Tool for Renault Clio EDC17C84 Bench Mode
Foxflash new user feedback:
Renault Clio MK4, 1,5dci
ECU: EDC17C84
Bench mode
EGR and DPF off.
Checksum by
foxflash.
Foxflash pinout to Renault EDC17C84 ECU
To read and write use the following driver:
→ BENCH TRICORE
→ RENAULT or NISSAN
→ TC1782 — RENAULT
→ EDC17 C84
ATTENTION: Some EDC17C84 enter in Bench mode with the white and brown wires on pins F4 and G4. If with previous pinout doesn’t enter in bench tricore mode, then try again by connecting it as version 2:
Fix Foxflash File Saving Error Step by Step
Problem:
Foxflash unable to read any ecu, whenever it gets to 100% / to save the file, it throws an error saying "file saving error". Anybody encounter this before?
Solution:
Reads fine, change saving folder.
Change folder your saving your files AND use admin rights to run program. You don’t have rights to save in current folder location.
Also make sure your file name and path are not too long.
Solve "ECU Locked by EEPROM" on Foxflash PCR2.1
Problem: Anyone had issues with this weird bug, where after PCR2.1 eeprom unlock, Foxflash stays "ECU LOCKED BY EEPROM"?
Solution:
Just read/write eeprom and unlock it.
Read Ori Eeprom.. Save it. Now write
The same File you just read. Now Eeprom unlocked.
When you unlock it, close program and start again, it will show unlocked.
How to Set Up Padflashr Software and Driver
Here we will walk you through how to install padflashr software and driver step-by-step. This is the baby-level setup guide for padflash programmer.
1: Visit https//padflashr.uk
Go to site download the software and tools drivers.
Download all 3 packages.
2: Go to donwload page , write your email and tools SN.
3:tools software
PATCH INSTALL
After download, please install the super driver with admin mode, and install the fix laptop patch.
SHUT DONW THE DEFENDER IN SYSTEM INSIDE(BELOW IS THE WINDOWS 10 64 SYSTEM, WIN11 AND WIN7 ALSO NEED DO THESE WORK )
Go to Update & Security.
Turn off All options.
4:install padflashr software
Install tools software.
5:write your email and tools serial number for register.
Write email creat your tools account.
Write the tools serial number which tie one your tools backside. If not activate, then ask tech assite activate it.
6: Restart your padflashr updater after register then download the update files.
7:wait download finish
8 after donwnload finish , restart the padflashr updater 3 times.
9: connect the PADFlash programmer and dongle install the dongle driver.
Install the dongle driver here.
10:connect the tools and drivers. Install the tools drivers.
!!!!!!Very importantings here ,don’t miss it !!!!!!
Keep your padflashr updater .exe is runing , then go to this
folder(C:disk/windows/systembin/pdata)
,set up the padflashr.exe as admin running mode(after set it as admin , then run it as admin mode , it will display a windows ask you input the sn ,so you write your tools big letters sn in it.then login) ,check the picture ,and follow me .
C:disk/windows/systembin/pdata
Find this padflash.exe
Set it as admin run mode.
11: run the padflashr updater.exe software ,click the active (don’t direct go to desktop run the padflash.exe), ,wait a little time , a windows will pop on,then write your tools serial number with big letters
After software open , click the actvate the FW, it have the licens for your tools fireware
Every time you need click it activate FW when you close your software, it will upgrade the whole tools fireware every time when you close the software.
Notice :windows 10 and windows 11 must shutdown the defender fully , and turn off the real time scan , and all need do , if all of these you do , you cant let the tools work well and software running well , contact the remote support help you refresh your windows system , it must be the windows lack some patch .
How to Read Smart ME7.7.0 ECU with Foxflash
Problem: I have a problem reading bosch me7.7.0 smart 1.0i ECU with Foxflash on bench. Any solution?
Solution:
Easy Boot for this ecu.
Boot mode works. With More voltage.
Ktag/KESS3
also does this ECU.
To read and write use the following driver:
→ TOOLS BOOT MODE
→ ST10Fxx
→ ST10F273 / ST10F275 / ST10F276 *K