FormulaFlash Reads Writes BMW 520D EDC17C50 Successfully
FormulaFlash programmer review:
2016 BMW 520D
EDC17C50 ECU
Tool Used: FormulaFlash
Bench mode.
Read eeprom and flash ok.
Write eeprom and flash ok.
Stage1 +Egr off
How to Read Benz MED17.7.3.1 ECU Foxflash or OBDSTAR DC706
Both Foxflash and OBDSTAR DC706 programmer will read and write Mercedes Benz MED17.7.3.1 engine ECU on bench mode.
With Foxflash:
You can do a full read (read all) of this ecu. On read all you can write all
without checksum, and restore like it was before.
But for modification,
absolutly not needed to flash all, just write flash.
Write only internal flash and external flash, no write eeprom.
With OBDSTAR DC706
You will need P003, P003+ or MP001 programmer to read this ECU on bench mode.
DC706 supports checksum correction for both eeprom and flash (int eeprom, int flash, ext flash). OBDSTAR also supports VIN writing on this ECU.
So OBDSTAR DC706 should be a better choice for this engine ECU.
Writing Benz CRD3.10 ECU: Foxflash or KESS Recommendations
Question:
Is it safe to write on OBD for this Mercedes-Benz CRD3.10 ECU using Foxflash?
Solution:
If need OBD, better use KESS V2 or KESS3.
KESS is better for MB CRD ECUs.
Better bench MB CRDxxx with foxflash.
If do it on bech, try it with 13.5 voltage, and the button on mfc cable let it on.
We read on bench every time without problem. Check conection, also power must to be connected on the bench box.
FormulaFlash 1.0.0.9 Expands MSD8x MSV90 MG1 MD1 Support
FormulaFlash ECU TCU programmer new software update: Version 1.0.0.9 (Available November 12, 2024)
Introducing New BMW Leading Functions and Enhanced Capabilities!
Our latest Formula Flash update brings advanced features to your toolkit, specifically designed to streamline your BMW diagnostics and modifications.
What’s New?
Added Functions:
• Full compatibility with additional BMW ECU models,
including:
• EDC17 series (EDC17C76, EDC17CP02, EDC17CP09,
EDC17CP45, EDC17CP49)
• ME17 & MED17 series (ME17.2,
ME17.2.1, ME17.2.4, ME17.2.42, MED17.2, MED17.2.2, MEVD17.2Fxx, and more)
•
New solutions for ISN & VIN reading/modification, IMMO OFF, and one-click
solutions across a wide range of models
• MSD80/MSD81/MSD85/MSD87
modules with ISN & VIN reading/modifying in just one click!
New Features on
MSV90/MG1CS003/MG1CS201/MD1CP002/MD1CP032/MD1CS001:
• ISN
& VIN reading functionality — seamlessly streamline BMW services.
Stay Ahead with Formula Flash!
With every update, our goal is to support
you with cutting-edge technology that simplifies diagnostics and delivers robust
one-click solutions. This latest release is designed to enhance your workflow
and open up new possibilities for BMW tuning and diagnostics.
Update your FormulaFlash software today and experience the difference!
Alientech KESS3 Boosts Tuning for SUVs and Off-Road Vehicles
New Upgrade-Pack for Alientech KESS3 and Powergate
Open new horizons for your workshop with the latest protocols for Toyota, Lexus, Dodge, and Jeep — perfect for those passionate about SUVs and off-road vehicles!
Here’s what the new development unlocks:
With KESS3, you can remap the
Denso GEN IV R7F702002 V35A-FTS ECUs for the newest Toyota and Lexus models
equipped with the 3.4 V6 petrol engine. For Dodge RAM, Jeep Gladiator JT, and
Wrangler JL, the Upgrade-Pack expands OBD capabilities with KESS3 and Powergate,
enabling work on the 3.0 V6 EcoDiesel engine.
This update also adds 17 new
protocols, expanding your service options with KESS3. Reprogram and clone
Continental P05150 6F24, Temic MPS6 Gen III, Bosch ZF8HP50 TCUs, along with
various GM, Mazda, Infiniti, Suzuki, and Chevrolet ECUs.
Supported Control Units
KESS3 ECU
•
Denso GEN IV R7F702002 V35A-FTS
• Bosch EDC17C69
• Delco E78, E80,
E98
• Bosch MED17.8.10
• Hitachi BED500–310
• Siemens D32
• Denso
N3S2
• Mitsubishi PAH9, PV10, PYFA
• Bosch EDC16C34
• Denso 33920–78LJ,
33920–62S0
KESS TCU
• Continental P05150 6F24
• Temic MPS6 Gen
III
• Bosch ZF8HP50
Reach new markets in Asia, the Middle East, and
Australia with unparalleled tuning and performance services.
