AutoTuner Update Enables OBD Read for Ford ME17.0.3 ECU
Autotuner released a new protocol for Ford Bosch ME17.0.3 ECUs.
A new release is now available for Bosch ME17.0.3 ECUs, now supported in OBD mode for Ford vehicles.
This protocol allows you to perform a real read (NR) directly through the OBD port, giving you immediate access to the ECU’s content.
Stay tuned to discover our upcoming new features!
Key Features
Type: Engine Control Unit (ECU)
Mode:
OBD NR
Readout: Calibration
MCU: TC1724
Read time:
1min
Write time: 30sec
Checksums correction
Compatibility List*
FORD Models: EcoSport — 2018 / Fiesta — 2017 / Ka — 2008 / Ka — 2014 /
Ka — 2018
Engines: 1.5 Duratec Ti-VCT / 1.0 T EcoBoost / 1.1i / 1.2i / 1.2
Ti-CVT
*The list of vehicles may evolve over time.
Alientech KESS3 Adds Full OBD for VAG Simos 19.3 & 19.6
Alientech KESS3 released new protocol for Continental SIMOS19 — VAG Group. Now you can work via OBD on the newest 2.0 TSI and TFSI engines (from 245hp) of the VAG Group from 2018 to today.
Manage reprogramming even on the most recent vehicles, directly from the diagnostic port, ensuring quick and safe operations in your workshop.
An update that definitely expands your opportunities on iconic and in-demand models, ensuring you can offer a complete service to your Audi, Cupra, Seat, Skoda, Porsche, and Volkswagen customers.
22.09.2025 — Upgrade 2.43
Technical focus
Connection: OBD
ECU: Continental SIMOS19.3,
SIMOS1.6
Production years: 2018-present
Brands
involved: Audi, Cupra, Seat, Skoda, Volkswagen
Supported vehicles
Audi S3, TT
Cupra Ateca, Leon, Formentor
Seat Ateca
Skoda Octavia
RS, Superb
Volkswagen Golf GTI, Golf R, T-Roc R
How to Solve PSA MD1CS003 ECU Bench Locked with Foxflash
Problem: Tried to read Peugeot Bosch MD1CS003 ECU 0281037200 with FoxFlash programmer but failed. Error SK2 bench locked.
Can Autotuner or Hexprog2 do them?
Solution:
They are not locked till around 2021. Done a lot of them with foxflash 2018–2021, this one is from 2022 and is locked.
0281 034 708 OK
0281 034 826 OK
0281 035 332 OK
0281 035 365
OK
0281 035 366 OK
0281 036 205 OK
0281 037 101 OK
0281 037 198 NOT
POSSIBLE
0281 037 200 NOT POSSIBLE
037–039 are locked.
Foxflash, Autotuner, Flex etc cannot read if locked.
Only v2flasher after 2020. Vf2 can unlock on lab and after that can read/write.
Tips for Peugeot MEVD17.4.4 ECU Reading and Writing Foxflash
Question:
I just bought FoxFlash to read my MEVD 17.4.4 Peugeot 308 GT
205 hp and I need some advice
Is 12V enough or is 14V better?
Once the
play is done I edit the file with WinOLS 4.7 I have a mappack and do I have to
do something else before I write the file so my car can start
smoothly?
Here is the clue.
12.5V to connect directly to the car, outside it’s better to prefer 14 volts or 13.5V.
You write that’s all, but let the tool do the checksum calculation.
Fox automatically does the tprot off automatically. It’s automatic!!
Must do the trpot off otherwise it only starts once.
How to Repair CG100X Connection Error After Upgrade
How to solve CG100X not connect problem after software upgrade?
Disconnect all, and plug 12V 2A for few seconds, plug USB and run
software.
Go to "Settings"–"About"–click "Check and fix".
Settings–"About"–click "Install Drive"
Settings–"Network"–change the server area one by one.
Must restart the software after changing the server and try again.
Please Note:
If you tried all still no work, please provide information below and contact www.iecutool.eu tech support:
Computer windows(Win7 or Win10?)
Show a video for the CG100X unit led
light show while you plug 12V and usb.