Audi DL501 Gen2 DSG gearbox cloning with foxflash programmer.
With only foxflash, skip godiag and dived right in.
DL501 GEN 2
Cloned from old tcu to new
Read ok
Write ok
Checksums
ok, on flash yes. Cloning is not needed, we backed up old tcu eprom and flash,
dumped to new as full backup.
All good.
Discover Effortless ISN & VIN Modification with FormulaFlash — Just One Click!
FormulaFlash allows you to modify ISN, VIN, and even perform Immo Off with a single click, saving time and simplifying complex processes. Unlock this powerful feature and streamline your work effortlessly!
Here iecutool.eu shows how to modify BMW MSD85 ISN and VIN using this feature.
Quick search MSD85 DME, choose Bench mode
Check wiring diagram, then connect Formula Flash with DME follow the wiring.
Connect ECU.
Then hit VIN/ISN/IMMO OFF function
It will auto read eeprom and flash data.
Read eerpom and flash data successfully. Then you will see Password, VIN and ISN.
Input the VIN or ISN value you desire to modify
Just hit Modify button.
Then press Generate.
Modify VIN/ISN successfully. Press Yes to write directly to ECU.
Write data successfully.
Check new update:
http://www.pcmtuner.org/forumaflash-1-0-0-9-adds-bmw-msv80-msv90-msd80-msd85-mg1/
FormulaFlash ECU TCU programmer released new software version 1.0.0.9 in Nov. 2024.
FormulaFlash software 1.0.0.9
Adds BMW ISN VIN Modification one-click solution
Update models:
MED17.2 TC1766
MED17.2, MED17.4.6 TC1796
MED17.2.2
TC1767
MED17.2.2 TC1797, R56, N55
MEVD 17.2.3 TC1793 B38,
B48
MEVD17.X.X TC1797 N12, B20, N55, S63
MSV80, MSV90, MSD80, MSD85,
MG1CS003, MG1CS021 read, write, modify by one click
FormulaFlash promotion:
Nov. 4th, 2024, Nov. 15th, 2024
Bonus 1: save $125
All existing user and new buyer will
get 6 month license free for the BMW VIN/ISN modification
package
Bonus 2: save $175
New buyer will get an
additional 6-month subscription for free.
The price for BMW VIN/ISN modification package is $250. After this promotion, it will be needed to pay extra to activate it.
We are reading the Fiat Bosch ME17.3.0 irom TC1724 ECU. We are flashing
directly with GPT.
But it does not work with pcmtuner directly.
Without the CNFs or the boots we are doing directly GPT1 from here. We need godiag gt100 breakout box and GPT adapter.
The GPT adapter has built-in resistors.
Set up GPT connection. Then we can read ECU with pcmtuner bench module 71.
With OBDSTAR DC706, users can read eeprom and flash on a 2011 VW jetta ME17.5.6 ECU, then use the immo decoder function to get the CS and PIN code from the ECU.
Immo data decryption give you the pin and CS. Read eeprom and flash, then hit immo data calculation. then it gives you CS, pin and MAC.
It also reads immo data, so you can load that in your key programmer and make a dealer key with the CS and PIN. Much easier to do AKL this way than pulling the cluster.
It is a hell of a lot easier than pulling the cluster. key work with 00 7th byte CS. then manually programmed remote.