Fix Foxflash Read Issue on SID803 ECU Bench Mode

Problem:

Tried to read Peugeot SID803 ECU with foxflash on bench. I can read jusd id. But not more. Any solution?

Solution:

Bench only sid803a while sid803 boot or bdm

SID803A obd/bench (check pinout)
SID803 boot

important sid803 maps in mpc not in flash.

SID803 boot pin to foxflash

Connect multifunction cable as follows:

Solder the dip/sip connectors on the pcb:

Insert Siemens/Marelli adapter as in photo:

To read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x

Only SID803a goes on bench, SID803 with opening and reading with other tools, i.e KESS3, Ktag etc.