How can you clone an ME17.3.0 ECU computer from the Fiat brand using CG FC200 programmer?
These computers come on the Fiat FCA platform of the Mopard line.
Run FC200 software, select Fiat, model and Bosch E17.3.0 ECU.
Check the wiring diagram. FC200 gives 3 versions of pinouts. Try them one by one. In this case, Pinout V2 works.
What is the difference between the three. To start with the first one, the only difference is that it only changes its ground line, which is in the second pin that, unlike the others, its gpt lines go
extreme, in this case they go extreme with version number 3, but at the top, version number 2 retains pin number 3 in position number 3, which is the Ground cable just like version 3. But the only thing that changes is the position of the gpt. In this case the gpt goes on pin number 1 and in this one it goes on number 3.
After we have the connection we are going to identify. FC200 connects with the computer.
To clone ECU, you have to back up original ECU eeprom and flash first which we have done that.
Then read and save eeprom (Dflash) on the donor ECU.
Read and save Pflash. FC200 reads without any problem.
Let’s write the Pflash. We are about to write the original data of the ECU to the donor ECU.
You need to verify pflash (correct checksum), click Yes. The pflash was written without any problem. That is a perfect clone.
We can clone by writing the eeprom and flash in the order. In this case I skipped the order.
CG FC200 is a very intuitive device that helps a lot.
Soultion for immo off for GREAT WALL WILGLE.
ECU BOSCH
0281013328
EDC16C39–6.H1
MADE IN CHINA
Great Wall EDC16C39–6.H1 IMMO OFF Tips
Make immo off in eeprom
only.
eeprom only 95320. You can read eeprom with CG FC200 or other programmers.
After writing
in eeprom 95320, then jump tthe ecu PINS on the PCB as described here.
Write IMMO OFF in 95320.
Bridge the PINs as described on the
picture.
Remove the immobiliser box.
Start the car.
Follow the
steps.
FormulaFlash is a new and relatively good-priced tool and to keep an eye on updates and news regarding to tool, iecutool.eu here lists real user feedback on this tool- what succeeded and what failed.
Success List:
DQ381 Read/write checksum ok
DQ250 read, write ok, checksum no
MED9.1
read/write, checksum no
Audi A4 B8 2.0 TDI EDC17C46 read/write Checkusm
ok
MED17.5.25 read/write ok, checksum ok
Med17.5.21 Read/Write, Immo off
in the FormulaFlash Software, Checksum ok
EDC17CP54 Read/Write Checksum
Mercedes GLC EDC17CP57 READ/WRITE AND CHECKSUM all good
BMW MSD80 read/modify VIN, read/modify ISN ok
read/write and check all
good med17.9.8
2016 BMW 5series — MSD85 Read ISN
Audi A7 2018 Me17.5.26
perfect
Read Audi A4 1.4 Med17.1.61 prefect
EDC17C81 Read/ Write
Cheksum
Land Rover Discovery 4 EDC17CP55 Read/ Write Cheksum
BMW EDC17c56
Read/write/ modify ISN/VIN IMMO OFF DIRECT IN SOFTWARE.
2016 BMW 520D
EDC17C50 Read/ Write Cheksum ok
EDC16C8 bench Read/ Write Cheksum ok
BMW
MSD85 read/modify VIN, read/modify ISN ok
Edc17c59 Read/write
Cheksum
cloning dq381 succesfully really easy
Edc16cp34 Read/write
Cheksum
ECU EDC16U1 Flash, extFlash, extEepeom — Read/Write, CS
Ok.
EDC16U31 Read/Write, CS Ok.
GM Delco E83 one-click immo off bench
ok
Delco E83 OBD read and write FormulaFlash
Yanmar Forklift
EDC17CV54.read and write checksum ok
Edc16c35 read write crc
VAG MED17.5
READ — WRITE — CRC Corrected
PSA — MEV17.4 BENCH READ — WRITE — CRC
Corrected
BMW 520D Stage 1 + EGR off With FormulaFlash Edc17c50 Read/write
CK
VW Tiguan 2019 EDC17C74 read, write, checksum
edc17c54 Read/write
checksum
Cloned DQ200 DQ250 DQ381 No problem very fast and
stable.
EDC17C10 R/W Checksum
Edc17c56 Read/write ck
Edc17cp54
Read/read Checksum
Fiat Fiesta 1.6tdci edc17c10 2012 Read/read
Checksum
2013 Mercedes Bclass VGS FDCT transmission clone worked
perfect.
Med 17.7.2 r/w+cs read write bench perfect
MEVD17.2.3 read,
write, checksum ok
Med17.7 2 r/w no worries
MED17.7.3 READ/WRITE
CHKSUM
Edc17c46 read write checksum ok
Edc17C60 cheksum and Tprot off
OK
KIA EDC17C08 read write checksum ok
Mercedes GLC EDC17CP57 READ/WRITE
AND CHECKSUM all good
EDC17C84 Renault trafic, adblue and fap off ok, very
easy
Edc17C60 Read Write Cheksum
MG1CS001 read/write checksum
ok
EDC17C06 Read Write Checksum FormulaFlash
MEDC17.9 Read Write
Checksum
MD1CS016 Read Write Checksum
Edc17C42 Read 1 min, Write 1–2min,
Cheksume
EDC17C10 Citroën Connections ok and checksum ok
EDC16C34 Citroën
Connections ok no cheksum do it manually
Edc17C60 Connections ok, cheksum
ok
2014 dodge ram 1500 ecodiesel Read Write Checksum
Edc17cp52 read bench
ok
MEVD 17.2.9 Fxx read, write ok
MG1CS003 read&write ok,
Checksum
EDC16U1 read&write Checksum
Read MED9.1 Bench Flash
Keep updating…
It is a VW Golf Ecu 1.4Tsi 2013 with Bosch MED17.5.21 ECU.
Read/Write no
problem with formulaflash.
Used the Immo off Function in the
FormulaFlash Software with one
click.
Checksum by Formula flash.
It’s a good tool for bench work only at the moment really.
Read and write
times are ok.
Has good support for Bosch ECUs.
2016 Jeep Grand Cherokee PCM cloning successfully done with OBDSTAR DC706.
PCM type: Jeep Continental GPEC2 MPC5566+95320
Device used: OBDSTAR DC706+ P003 adapter or MP001
Do it in boot mode. Need to use extra power supply.
Read EXT eeprom and Read INT flash of the original PCM.
Backup both eeprom and flash of the donor PCM.
Write EXT eeprom and write
INT flash to the donor PCM.