How to Disable Aprilia Dorsoduro 750 IMMO Using Foxflash
Foxflash user feedback:
Aprilia Dorsoduro 750 motorcycle immo off with Foxflash successfully.
Read and write via OBD.
How to read this ecu with foxflash?
Buy adapter Fiat 4 pin to OBD. And read write by OBD. You can make the Ecu
Immo off.
But this is not going to solve dash issues! Like security code
bypass for the dash.
You can make only ecu immo off. After that you have to change the eeprom in the dash. And then you can enter a code in the dash. And start the bike without a transponder.
Foxflash Bench Mode to read Iveco Euro Cargo EDC7UC31 ECU
User review:
Iveco Euro cargo 2013 Bosch EDC7UC31 First
truck.
Read ok, write ok, checksum by foxflash.
Bench mode.
Also tested
1. EDC7UC31 IVECO STRALIS
Read/Write/Checksum OK
ADBLUE
OFF
2.
Iveco Trekker 410
Read/write/checksum
EDC7UC31
Foxflash bench pinout to Iveco truck EDC7UC31
To read and write use the following driver:
→ BENCH MODE
→ Iveco
→ MPC561 — Iveco
→ EDC7 UC31
Foxflash Read/Write Issues with DSG DQ250 MQB Gearbox
Problem:
I need to write immo off data on DSG DQ250 MQB using foxflash
programmer.
I can read Backup, flash, EEPROM.
I can write Backup, immo off
flash
I can’t write only eeprom, immo off EEPROM.
Any solution?
Here is the clue.
DQ250 MQB has two EEPROM
Int EEPROM & ext EEPROM.
No solution with
Foxflash.
Foxflash can’t Read &Write ext EEPROM.
You will need other tools, Flex, Autotuner, Launch X-prog3 or Launch ecu programmer etc.
Foxflash Boot Mode Solution for BMW EDC17C50 ECU Cloning
Reading BMW Bosch EDC17C50 ECU with foxflash on bench. But it kept stopping at 44% when writing file on bench using clone function (Built-in function).
Opened it and worked right away in boot mode. All ok.
Cloned ecu successfully.
Password BFT read.
15 minutes write.
When you clone the Bosch ECU you have to look at what it says EEPROM PROTECT, then bench blocks the ECU, it has to be because of boot.
How to read/ write Ford Transit Custom SID211 ECU with Foxflash
Ford Transit Custom 2.0 TDCI/TDDI
125kW MY 12/2016
SID211 Read and
Write with
Foxflash via OBD-Protocol in Direct-Mod via Pinout (via OBD on
bench).
Read 2min 51sec
Write 10min 59sec
For EGR and selected DTC
off.
Read/Write by Foxflash software.
CS by Winols
Use this pinout
